Your shopping cart is empty!
The full bridge plus toroidal transformer topology has
proven its reliability over many years. The inverter is short circuit proof and
protected against overheating, whether due to overload or high ambient
High start-up power
Needed to start high inrush loads such as power converters
for LED lamps, halogen lamps or electric tools.
When Search Mode is ‘on’, the power consumption of the
inverter in no-load operation is decreased by approx. 70%. In this mode the
Multi, when operating in inverter mode, is switched off in case of no load or
very low load, and switches on every two seconds for a short period. If the
output current exceeds a set level, the inverter will continue to operate. If
not, the inverter will shut down again.
By default, the programmable relay is set as an alarm relay,
i.e. the relay will de-energise in the event of an alarm or a pre-alarm
(inverter almost too hot, ripple on the input almost too high, battery voltage
almost too low).
Remote on / off / charger on
Remote operation can be implemented by connecting a switch
to the three pole connector
There are no reviews for this product.