EasySolar 12/1600/70-16 MPPT 100/50
- Brand:Victron Energy
- Product Code: 12/1600/70-16 MPPT 100/50
|Charge current||70 A|
|Charger AC Input||187-265 VAC Input frequency: 45 – 65 Hz|
|Cont. output power at 25°C (W)||1300 W|
|Input voltage range (V DC)||9,5 – 17 V|
|Max efficiency (%)||92|
|Output AC voltage/frequency||230 VAC ± 2% 50 Hz ± 0,1%|
|Peak Power (W)||3000 W|
|Protection||- Output short circuit - Overload - Battery voltage too high - Battery voltage too low - Temperature too high - 230VAC on inverter output - Input voltage ripple too high|
|Transfer switch (A)||16 A|
|Zero load power (W)||8 W|
|Solar charge controller|
|Max PV open circuit voltage||100 V|
|Max PV power||700 W|
|Max.output current||50 A|
All-in-one solar power solution
The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.
The solar charge controller: Blue Solar MPPT 100/50
Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.
The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40
The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset.
The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available.
Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.
Unique solar application software
Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications.